I-LADP-3 I-Microwave Electron Spin Resonance Apparatus eFakelweyo Umfanekiso

I-LADP-3 yeMicrowave Electron Spin Resonance Apparatus

Inkcazelo emfutshane:

I-Electron spin resonance ikwabizwa ngokuba yi-electron paramagnetic resonance, ebhekisa kwisenzeko senguqu ye-resonance phakathi kwamanqanaba ombane wemagnethi we-electron spin umzuzu wemagnethi xa ichatshazelwa ngamaza ombane ohambelana nemagnethi kummandla wemagnethi.Lo mcimbi unokubonwa kwizixhobo zeparamagnetic kunye nemizuzu yemagnethi ejikelezayo engadityaniswanga (oko kukuthi iikhompawundi eziqulethe ii-electron ezingadityaniswanga).Ke ngoko, i-electron spin resonance yindlela ebalulekileyo yokufumanisa ii-electron ezingadityaniswanga kwimiba kunye nokusebenzisana kwazo kunye nee-athomu ezijikelezileyo, ukuze ufumane ulwazi malunga ne-microstructure yezinto.Le ndlela inovakalelo oluphezulu kunye nesisombululo, kwaye ingasetyenziselwa ukuhlalutya izinto ngokubanzi ngaphandle kokonakalisa isakhiwo sesampulu kwaye akukho ukuphazamiseka kwi-chemical reaction.Okwangoku, isetyenziswa ngokubanzi kuphando lwefiziksi, ikhemistri, ibhayoloji kunye neyeza.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimvavanyo

1. Funda kwaye uvume i-electron spin resonance phenomenon.

2. Umlinganiselo kaLandeg-into yesampulu ye-DPPH.

3. Funda indlela yokusebenzisa izixhobo ze-microwave kwinkqubo ye-EPR.

4. Qonda i-wave wave ngokutshintsha ubude be-resonant cavity kunye nokumisela ubude be-waveguide.

5. Ukulinganisa ukuma kwamaza osasazo kwindawana ye-resonant kunye nokumisela ubude be-waveguide.

Iinkcukacha

Inkqubo yeMicrowave
Ipiston yesekethe emfutshane	uluhlu lohlengahlengiso: 30 mm
Isampulu	I-DPPH powder kwityhubhu (imilinganiselo: Φ2×6 mm)
imitha frequency microwave	uluhlu lomlinganiselo: 8.6 GHz ~ 9.6 GHz
Imilinganiselo yeWaveguide	ngaphakathi: 22.86 mm × 10.16 mm (EIA: WR90 okanye IEC: R100)
Imagnethi yombane
Igalelo lombane kunye nokuchaneka	Ubuninzi: ≥ 20 V, 1% ± 1 idijithi
Igalelo langoku kunye nokuchaneka	0 ~ 2.5 A, 1% ± idijithi e-1
Uzinzo	≤ 1×10^-3+5 mA
Ukomelela kwemagnethi	0 ~ 450 mT
Tshayela Ibala
Imveliso yombane	≥ 6 V
Imveliso yoluhlu lwangoku	0.2 ~ 0.7 A
Uluhlu lohlengahlengiso lwesigaba	≥ 180 °
Imveliso yokuskena	Isidibanisi se-BNC, i-saw-tooth wave wave 1 ~ 10 V
Umthombo woMqondiso weMicrowave yeState eSolid
Ukuphindaphinda	8.6 ~ 9.6 GHz
Ukuqhutywa rhoqo	≤ ± 5×10^-4/15 imiz
Umbane osebenzayo	~ 12 VDC
Amandla emveliso	> 20 mW phantsi kwemo ye-amplitude elinganayo
Imo yokusebenza kunye neeparamitha	Ubukhulu obulinganayo
	Ukumodareyitha kwangaphakathi kwesikweri-amaza ukuphindaphinda: 1000 Hz Ukuchaneka: ± 15% ukutyeka: < ± 20％

Imilinganiselo yeWaveguide	ngaphakathi: 22.86 mm × 10.16 mm (EIA: WR90 okanye IEC: R100)

Uluhlu lwamacandelo

Inkcazo	Qty
UMlawuli oPhambili	1
Imagnethi yombane	1
Isiseko senkxaso	3
Inkqubo yeMicrowave	Iseti e-1 (kubandakanywa amacandelo ahlukeneyo e-microwave, umthombo, umtshini, njl.njl)
Isampulu yeDPPH	1
Intambo	7
Incwadi yokufundisa	1